Bi‐directional coupled tuned mass dampers for the seismic response control of two‐way asymmetric‐plan buildings     

Keh‐Chyuan Tsai  Yi‐Jer Yu 《地震工程与结构动力学》2011,40(6):675-690

This paper proposes bi‐directional coupled tuned mass dampers (BiCTMDs) for the seismic response control of two‐way asymmetric‐plan buildings subjected to bi‐directional ground motions. The proposed BiCTMD was developed from the three‐degree‐of‐freedom modal system, which represents the vibration mode of a two‐way asymmetric‐plan building. The performance of the proposed BiCTMD for the seismic response control of elastic two‐way asymmetric‐plan buildings was verified by investigating the reductions of the amplitudes of the associated frequency response functions. In addition, the investigation showed that the proposed BiCTMD is effective in reducing the seismic damage of inelastic asymmetric‐plan buildings. Therefore, the BiCTMD is an effective approach for the seismic response control of both elastic and inelastic two‐way asymmetric‐plan buildings. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

Discussion of paper ‘Revisiting Eurocode 8 formulae for periods of vibration and their employment in linear seismic analysis’ by Helen Crowley and Rui Pinho,Earthquake Engineering and Structural Dynamics 2010; 39(2):223–235     

S. Bahadir Yuksel 《地震工程与结构动力学》2011,40(11):1297-1298

  相似文献   

水轮机流道压力脉动诱发厂房振动分析   总被引：2，自引：0，他引：2  

郭涛  张立翔  姚激 《地震工程与工程振动》2011,31(6):136-140

水轮机压力脉动是引起厂房内源振动的主要诱因,如何在振动系统中合理、准确地施加水力荷载的振源特性,是目前机组振动分析的主要难点.文中将压力脉动假定为简谐荷载,通过跟踪楼板的振动变化和共振校核确定机组的振源特性,采用有限元法精细模拟了水轮机流道压力脉动诱发的厂房振动问题,并结合电站特点提出振动控制标准的建议值,由此对振动进...  相似文献   

城市轨道交通U型梁动力性能研究与实验验证     

王彬力  蒲黔辉  白光亮 《地震工程与工程振动》2011,31(6):174-180

为探讨城市轨道交通U型梁车桥系统的动力响应,采用线性化轮轨模型建立了31个自由度的轮轨式车辆动力学模型.模型考虑了新型算法的横竖向轨道不平顺,以重庆市轨道交通一号线工程中梁山以西高架区间所采用标准跨径为30m的单线小U结构为对象,采用自编程序对机车车辆过桥时的车桥耦合振动进行了分析,并通过计算与实测结果的对比分析对所建...  相似文献   

基于DTU的加速度强振动记录终端的设计     

吴林斌  陈志高  关伟智  吕瀚  李家明  吴雄伟 《大地测量与地球动力学》2011,31(Z1):155-156,164

设计基于DTU的强振记录终端,采用SOC系列C8051F015型单片机对MEMS加速度计的输出信号进行A/D转换,监测待测体所经受的强振加速度值,并通过DTU内嵌的GPRS无线网络通讯方式将数据发送到远程数据中心.该系统具有体积小,安装与操作方便,免维护等特性.  相似文献   

基于小波包分解的结构自振特征提取及多路径误差分离     

吴继忠  花向红  高俊强 《武汉大学学报(信息科学版)》2010,(4)

为了准确获取结构自振特性,通过分析多路径误差和结构振动的频率特征,采用小波包分解和频谱分析相结合的方法,在不同尺度下进行特定成分的提取,再作频率特性分析。实验结果表明,小波包能够有效地分离多路径误差,实现结构振动特征的提取,GPS测定的结构自振频率与理论值吻合较好,并且具有很好的稳定性。  相似文献   

A new model for the vibration isolation via pile rows consisting of infinite number of piles     

Jian‐Fei Lu  Dong‐Sheng Jeng  Jian‐Wei Wan  Ji‐Sheng Zhang 《国际地质力学数值与分析法杂志》2013,37(15):2394-2426

In this study, on the basis of the Floquet transform method, a numerical model for the simulation of the vibration isolation via multiple periodic pile rows with infinite number of piles is established. By means of the fictitious pile method due to Muki and Sternberg, the second kind of Fredholm integral equations for the pile rows are developed by using the fundamental solutions for the half‐space and the compatibility conditions between the piles and half‐space. Employing the Floquet transform method, integral equations for the pile rows in the wavenumber domain are then derived. Solution of the integral equations yields the wavenumber domain solution for the pile rows. The space domain solution can then be retrieved by inversion of the Floquet transform. Numerical results show that the proposed model with the Floquet transform method is in a good agreement with those of the conventional direct superposition method. On the basis of the new model, influences of the spacing between neighboring piles, the Young's modulus of the piles, and the pile length on the vibration isolation effect of the pile rows are investigated. Numerical simulations conducted in this study show that compared with the direct superposition method, the efficiency of the proposed model for simulation of the vibration isolation via pile rows is very high. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Large Eddy Simulation on Interaction Between in-Line and Cross-Flow Oscillation of A Circular Cylinder     

黄智勇  Carl M.LARSEN 《中国海洋工程》2010,(4)

This paper discusses numerical results from three-dimensional large eddy simulations of an oscillating cylinder under prescribed movements in uniform flow. Six cases,namely pure in-line,pure cross-flow and two groups of 'Figure of Eight' oscillation patterns are under investigation at Reynolds number Re=24000. The 'Figure of Eight' pattern in each group is with identical shape but opposite orbital directions. The numerical results on hydrodynamic forces,higher order force components,and vortex shedding mode...  相似文献   

Numerical study of an oscillating smaller cylinder in the wake of an upstream larger cylinder     

TAN Soon Keat 《中国海洋大学学报(英文版)》2012,11(2):111-117

A numerical study of flow around two tandem cylinders with unequal diameters was carried out. The upstream larger cylinder was fixed and the downstream smaller cylinder was allowed to oscillate in the transverse direction only. Comparisons of the experimental and numerical results were made to investigate the effects of the gap ratio on the maximum vibration amplitude and vortex shedding frequency. The results showed that the vibration response of the smaller cylinder was significantly affected by the presence of the upstream larger cylinder, and resulted in greatly reduced vibration amplitudes. With an increasing gap ratio, the vibration amplitude increased. However, the magnitude was lower than that corresponding to a single cylinder (with the same diameter as that of the downstream smaller cylinder) under the same flow conditions.  相似文献   

An alternative approach for computing seismic response with accidental eccentricity     

Xuanhua Fan  Jiacong Yin  Shuli Sun  Pu Chen 《地震工程与工程振动(英文版)》2014,13(3):401-410

Accidental eccentricity is a non-standard assumption for seismic design of tall buildings. Taking it into consideration requires reanalysis of seismic resistance, which requires either time consuming computation of natural vibration of eccentric structures or finding a static displacement solution by applying an approximated equivalent torsional moment for each eccentric case. This study proposes an alternative modal response spectrum analysis(MRSA) approach to calculate seismic responses with accidental eccentricity. The proposed approach, called the Rayleigh Ritz Projection-MRSA(RRP-MRSA), is developed based on MRSA and two strategies:(a) a RRP method to obtain a fast calculation of approximate modes of eccentric structures; and(b) an approach to assemble mass matrices of eccentric structures. The efficiency of RRP-MRSA is tested via engineering examples and compared with the standard MRSA(ST-MRSA) and one approximate method, i.e., the equivalent torsional moment hybrid MRSA(ETM-MRSA). Numerical results show that RRP-MRSA not only achieves almost the same precision as ST-MRSA, and is much better than ETM-MRSA, but is also more economical. Thus, RRP-MRSA can be in place of current accidental eccentricity computations in seismic design.  相似文献